Designing Embedded Systems with Xilinx ZYNQ (Part 1) : Introduction

My Xilinx ZYNQ Training Video-Book, will contain a series of Videos through which I will make the audience familiar with the architecture of the ZYNQ device. Then, I will teach how one can design embedded systems for the ZYNQ using the Vivado environment.

Each Video will be accompanied by a set of files, such as presentation slides, sample designs and so on.

Each of the following mentioned topics may span several video files.

Course Contents

1. Introduction to ZYNQ Architecture
2. What is AXI?
3. Howto setup and use available ZYNQ Evaluations kits : ZED Board, ZC-702, ZC-706 and …
4. Using the ZYNQ PS : Bringing up the Linux on the ZYNQ ARM Host
5. Using Vivado Environment to design with ZYNQ
6. Creating custom AXI interfaces and Peripherals
7. Creating Packaged IP blocks using Vivado
8. Designing with AXI : Creating Hierarchies of AXI based components
9. Building systems of Multiple CPU cores of different types
10. Example projects

I will add each lesson through a new post here, under my ZYNQ Training category in Googoolia.

I will try to produce at least 2 to 3 lessons each week.